Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Dell Inspiron 14-3452 Screen Replacement

Cosa ti serve

  1. Dell Inspiron 14-3452 Screen Replacement, Battery: passo 1, immagine 1 di 2 Dell Inspiron 14-3452 Screen Replacement, Battery: passo 1, immagine 2 di 2
    • Remove the battery by sliding the battery release latch to the left.

    • Pull the entire battery away from the backing.

  2. Dell Inspiron 14-3452 Screen Replacement, Random Access Memory (RAM): passo 2, immagine 1 di 1
    • Ensure that the laptop is completely turned off and the battery is removed.

    • Remove the two Phillips Head 5 mm #0 screws holding the backing in place.

  3. Dell Inspiron 14-3452 Screen Replacement: passo 3, immagine 1 di 1
    • Pull the backing away from the laptop.

  4. Dell Inspiron 14-3452 Screen Replacement: passo 4, immagine 1 di 1
    • Locate the blue RAM chip sitting in the RAM bay.

    • Use your fingertips to pry apart the white RAM securing-clips on each side of the memory-module slot until the RAM chip pops up.

  5. Dell Inspiron 14-3452 Screen Replacement: passo 5, immagine 1 di 1
    • Pull the RAM chip away from the memory-module slot.

    • The RAM chip is now fully detached and ready to be replaced.

  6. Dell Inspiron 14-3452 Screen Replacement, Screen: passo 6, immagine 1 di 1
    • Remove the ten Phillips Head 5 mm #0 screws from the computer backing.

    • Remove the one Phillips Head 3 mm #0 screw from the computer backing.

  7. Dell Inspiron 14-3452 Screen Replacement: passo 7, immagine 1 di 2 Dell Inspiron 14-3452 Screen Replacement: passo 7, immagine 2 di 2
    • Remove the white and black antenna cables from the wireless card.

  8. Dell Inspiron 14-3452 Screen Replacement: passo 8, immagine 1 di 1
    • Remove the Phillips Head 3 mm #0 screw that is holding the wireless card in place.

  9. Dell Inspiron 14-3452 Screen Replacement: passo 9, immagine 1 di 1
    • Slide the wireless card out of the wireless card bay.

  10. Dell Inspiron 14-3452 Screen Replacement: passo 10, immagine 1 di 2 Dell Inspiron 14-3452 Screen Replacement: passo 10, immagine 2 di 2
    • Using your fingertips remove the speaker cable from the motherboard by pulling the white connector away from the socket.

  11. Dell Inspiron 14-3452 Screen Replacement: passo 11, immagine 1 di 1
    • Pry apart the keyboard assembly slowly as the keyboard cable will still be attached to the motherboard.

    • Use the blue Uspudger to pry apart the keyboard assembly from the bottom shell.

  12. Dell Inspiron 14-3452 Screen Replacement: passo 12, immagine 1 di 1
    • Disconnect the keyboard cable from the motherboard by lifting the black latch and pulling the cable out of its socket.

  13. Dell Inspiron 14-3452 Screen Replacement: passo 13, immagine 1 di 2 Dell Inspiron 14-3452 Screen Replacement: passo 13, immagine 2 di 2
    • Disconnect the display cable from the motherboard by pulling the tape back and lifting the connector latch.

    • Pull the display cable away from the motherboard.

  14. Dell Inspiron 14-3452 Screen Replacement: passo 14, immagine 1 di 1
    • Remove the power adapter cable from the motherboard by sliding the cable out of its socket.

  15. Dell Inspiron 14-3452 Screen Replacement: passo 15, immagine 1 di 1
    • Turn laptop over to access the screen hinge screws.

    • Remove the two Phillips Head 5 mm #0 screws from the two hinges.

  16. Dell Inspiron 14-3452 Screen Replacement: passo 16, immagine 1 di 2 Dell Inspiron 14-3452 Screen Replacement: passo 16, immagine 2 di 2
    • Using your fingertips, gently pry up the inner edges of the display bezel.

    • Lift the display bezel off the display assembly.

  17. Dell Inspiron 14-3452 Screen Replacement: passo 17, immagine 1 di 3 Dell Inspiron 14-3452 Screen Replacement: passo 17, immagine 2 di 3 Dell Inspiron 14-3452 Screen Replacement: passo 17, immagine 3 di 3
    • After removing the bezel, locate the tab indicated in the pictures.

    • Lift the tab as shown in the pictures.

    • Lift the gold latch securing the display cable to the socket.

    • Pull display cable away from the socket.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Alec Siegel

Membro da: 01/30/18

598 Reputazione

4 Guide realizzate

Team

Baylor, Team S2-G2, Johnson Spring 2018 Membro di Baylor, Team S2-G2, Johnson Spring 2018

BU-JOHNSON-S18S2G2

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 18

Tutti i Tempi: 876