Introduzione

In this guide, we will be showing you how to remove and replace the Display Assembly.

Parti

Nessuna parte richiesta.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Disconnect the display cable from the connector on the system board.

Aggiungi Commento

Remove the two screws (one on each side) that secure the display assembly to the computer base.
  • Remove the two screws (one on each side) that secure the display assembly to the computer base.

Aggiungi Commento

  • Lift and remove the display assembly out of the computer base.

Aggiungi Commento

  • Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.

Aggiungi Commento

  • Connect the display cable to the connector on the system board.

Aggiungi Commento

Linea Traguardo

Terrence15

Membro da: 18/12/2017

69.461 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

917 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 23