Introduzione

In this guide, we will show you how to remove and replace the Display Assembly.

Parti

Nessuna parte richiesta.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in  Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Disconnect the display cable from the connector on the system board.

    Aggiungi Commento

  2. Remove the two screws (one on each side) that secure the display assembly to the computer base.
    • Remove the two screws (one on each side) that secure the display assembly to the computer base.

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Lift and remove the display assembly out of the computer base.

    Aggiungi Commento

    • Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.

    Aggiungi Commento

    • Connect the display cable to the connector on the system board.

    Aggiungi Commento

Linea Traguardo

Terrence15

Membro da: 18/12/2017

69.949 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 42