Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the latch, and disconnect the hard-drive cable from the connector on the system board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the hard-drive assembly along with its cable off the palm-rest assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four screws (M3x3) that secure the hard-drive bracket to the harddrive assembly.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the hard-drive assembly off the hard-drive bracket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the interposer from the hard drive.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Connect the interposer to the NEW hard drive
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Align the screw holes on the hard-drive bracket with the screw holes on the hard-drive assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Replace the four screws (M3x3) that secure the hard-drive bracket to the harddrive assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Replace the two screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.
-