Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Dell Inspiron 14 3467 Base Cover Replacement

Introduzione

How to remove and replace the Base Cover.

Cosa ti serve

  1. Dell Inspiron 14 3467 Base Cover Replacement, Turning over the Computer: passo 1, immagine 1 di 1
    Traduci

  2. Dell Inspiron 14 3467 Base Cover Replacement, Remove the Screws: passo 2, immagine 1 di 1

    • Remove the eight screws that secure the base cover to the palm-rest assembly.

    Traduci

  3. Dell Inspiron 14 3467 Base Cover Replacement, Removing the Screws: passo 3, immagine 1 di 1

    • Remove the two screws that secure the base cover to the palm-rest assembly.

    Traduci

  4. Dell Inspiron 14 3467 Base Cover Replacement, Removing the screws: passo 4, immagine 1 di 1

    • Remove the three screws that secure the base cover to the palm-rest assembly.

    Traduci

  5. Dell Inspiron 14 3467 Base Cover Replacement, Turning the Computer over: passo 5, immagine 1 di 1

    • Turn the computer over, and open the display.

    Traduci

  6. Dell Inspiron 14 3467 Base Cover Replacement, Removing the Screws: passo 6, immagine 1 di 1

    • Remove the three screws that secure the base cover to the palm-rest assembly.

    Traduci

  7. Dell Inspiron 14 3467 Base Cover Replacement, Disconnecting the Optical-Drive Cable: passo 7, immagine 1 di 1

    • Open the latch, and disconnect the optical-drive cable from the system board.

    Traduci

  9. Dell Inspiron 14 3467 Base Cover Replacement, Turning the Computer Over: passo 8, immagine 1 di 1

    • Close the display, and turn the computer over

    Traduci

  10. Dell Inspiron 14 3467 Base Cover Replacement, Prying the Base Cover: passo 9, immagine 1 di 1

    • Using a plastic scribe, pry the base cover off the palm-rest assembly.

    Traduci

  11. Dell Inspiron 14 3467 Base Cover Replacement, Lifting the Base Cover: passo 10, immagine 1 di 1

    • Lift the base cover off the palm-rest assembly.

    Traduci

  12. Dell Inspiron 14 3467 Base Cover Replacement, Release the Optical-Drive Interposer: passo 11, immagine 1 di 1

    • Release the optical-drive interposer from the tabs, and remove it from the base cover.

    Traduci

  13. Dell Inspiron 14 3467 Base Cover Replacement, Sliding the Optical-Drive: passo 12, immagine 1 di 1

    • Slide the optical-drive interposer into the tabs on the NEW base cover and snap it into place.

    Traduci

  14. Dell Inspiron 14 3467 Base Cover Replacement, Placing the Base Cover: passo 13, immagine 1 di 1

    • Place the base cover on the palm-rest assembly and route the optical-drive cable through the slot on the palm-rest assembly.

    Traduci

  15. Dell Inspiron 14 3467 Base Cover Replacement, Sliding the Tabs: passo 14, immagine 1 di 1

    • Slide the tabs on the base cover into the slots on the palm-rest assembly, and snap the base cover into place.

    Traduci

  16. Dell Inspiron 14 3467 Base Cover Replacement, Sliding the Optical-Drive Cable: passo 15, immagine 1 di 1

    • Slide the optical-drive cable into the connector on the system board and press down the latch to secure the cable.

    Traduci

  17. Dell Inspiron 14 3467 Base Cover Replacement, Placing the Screws: passo 16, immagine 1 di 1

    • Replace the three screws (M2x5) that secure the base cover to the palm-rest assembly.

    Traduci

  18. Dell Inspiron 14 3467 Base Cover Replacement, Turning over the Computer: passo 17, immagine 1 di 1

    • Close the display, and turn the computer over.

    Traduci

  19. Dell Inspiron 14 3467 Base Cover Replacement, Replacing the Screws: passo 18, immagine 1 di 1

    • Replace the three screws (M2x2) that secure the base cover to the palm-rest assembly.

    Traduci

  20. Dell Inspiron 14 3467 Base Cover Replacement, Replacing the Screws: passo 19, immagine 1 di 1

    • Replace the two screws (M2x5) that secure the base cover to the palm-rest assembly.

    Traduci

  21. Dell Inspiron 14 3467 Base Cover Replacement, Replacing the Screws: passo 20, immagine 1 di 1

    • Replace the eight screws that secure the base cover to the palm-rest assembly.

    Traduci
Linea Traguardo

Un'altra persona ha completato questa guida.

Autore

con 2 altri collaboratori

darrius

Membro da: 03/26/18

5.213 Reputazione

30 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

RampUP America, Inc. Membro di RampUP America, Inc.

Community

42 Membri

1.986 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 18

Tutti i Tempi: 1,985