Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In this guide, we will show you how to remove and replace the Hard Drive.
Cosa ti serve
-
-
Remove the screws that secure the hard-drive assembly to the computer base.
-
-
-
Open the latch and disconnect the hard-drive cable from the system board.
-
-
-
Remove the screws that secure the hard-drive bracket to the hard drive.
-
-
-
-
Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
-
-
-
Replace the screws that secure the hard-drive bracket to the hard drive.
-
-
-
Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
-
-
-
Replace the screws that secure the hard-drive assembly to the computer base.
-
-
-
Slide the hard-drive cable into the system board and close the latch to secure the cable.
-