Introduzione

In this guide, we will show you how to remove and replace the Hard Drive.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in  Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the four screws that secure the hard drive assembly to the computer base.

  2. Slide the hard drive assembly to disconnect it from the system board connector.
    • Slide the hard drive assembly to disconnect it from the system board connector.

    • Pull the black pull-tab and lift the hard drive assembly out of the computer base.

    • Remove the four screws that secure the hard drive to the hard drive cage.

    • Slide the hard drive out of the hard drive cage.

    • Slide the NEW hard drive into the hard drive cage.

    • Replace the four screws that secure the hard drive to the hard drive cage.

    • Place the hard drive assembly in the computer base.

    • Slide and connect the hard drive assembly to the system board connector.

    • Replace the four screws that secure the hard drive assembly to the computer base.

Linea Traguardo

Terrence15

Membro da: 18/12/2017

70.198 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 39