Introduzione

In this guide, we will show you how to remove and replace the Hard Drive.

Parti

Nessuna parte richiesta.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

    • Remove the three screws that secure the hard drive assembly to the computer base.

  2. Pull the pull-tab on the hard drive bracket towards the right to disconnect the hard drive assembly from the interposer.
    • Pull the pull-tab on the hard drive bracket towards the right to disconnect the hard drive assembly from the interposer.

    • Pull the pull-tab on the hard drive bracket to lift the hard drive assembly at an angle and out of the hard drive compartment as shown in the illustration.

    • Remove the four screws that secure the hard drive bracket to the hard drive and remove the hard drive bracket.

    • Replace the hard drive bracket and the four screws that secure the NEW hard drive bracket to the hard drive.

    • Place the hard drive assembly in the hard drive compartment.

    • Push the hard drive assembly towards the left until it is fully connected to the interposer.

    • Replace the three screws that secure the hard drive assembly to the computer base.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Terrence15

Membro da: 18/12/2017

70.258 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 83