Dell Inspiron 11-3164 Keyboard Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

As seen in the picture, the entire panel is being replaced. This maintenance will require tearing down the plastic cover which holding down the assembly to the keyboard cover. Once separated the key assembly and the keyboard panel will need to be glued back together. It is possible to remove the keys from the keyboard, but damage may occur. Therefore, keyboard assembly maintenance is strongly discouraged.

Cosa ti serve

Passo 1 Keyboard

Dell Inspiron 11-3164 Keyboard Replacement, Keyboard: passo 1, immagine 1 di 2

Dell Inspiron 11-3164 Keyboard Replacement, Keyboard: passo 1, immagine 2 di 2

Place laptop upside down to observe the first set of screws on the bottom cover. With the J1 Phillips head screwdriver bit, unscrew eight (8) size 60 mm screws.
With a metal spudger, remove the plastic cover to unveil the final screw.
With the J1 Phillips head bit, remove remaining 60 mm screw.

Traduci

Passo 2

With a metal spudger, pry apart the bottom cover working around the edges.
While separating the halves of the bottom cover, carefully move the spudger up and down to avoid damaging the USB/Audio circuit board cable inside.
With tweezers, disconnect the USB/Audio circuit board cable.
Place the bottom cover off to the side.

Traduci

Passo 3

With the J1 screwdriver bit, unscrew three (3) size 40 mm battery screws.

Traduci

Passo 4

With tweezers, disconnect the battery cable.
Remove the battery pack.

Traduci

Passo 5

Dell Inspiron 11-3164 Keyboard Replacement: passo 5, immagine 3 di 3

Remove the M2 x 3mm bracket screw.
Remove the metal bracket.
With tweezers, detach the white and black antenna cables connected to the Wireless WLAN Card.
Remove the Wireless WLAN Card.

Traduci

Passo 6

With tweezers, unplug the CMOS battery.
With tweezers, detach the CMOS battery.

Traduci

Passo 7

With tweezers, unplug the DC Jack cable.
With the Philips #0 Screwdriver, loosen the M2 x 3mm screw.
With tweezers, detach the DC Jack.

Traduci

Passo 8

With tweezers, disconnect the speaker cable.
With tweezers, detach the speaker.

Traduci

Passo 9

With the Philips #0 Screwdriver, unbolt the M2 x 3mm screw.
Remove the metal bracket.
With tweezers, disconnect the display cable.

Traduci

Passo 10

Dell Inspiron 11-3164 Keyboard Replacement: passo 10, immagine 3 di 3

With the Philips #0 Screwdriver, unfasten the 2 - M2.5 x 5mm left and right hinge screws.
With the Philips #0 Screwdriver, unhinge the 2 - M2.5 x 5mm display cable bracket screw.
With tweezers, remove the LCD screen.

Traduci

Passo 11

With the Philips #0 Screwdriver, loosen the 4 screws supporting the copper plate.
With tweezers, remove the copper plate.

Traduci

Passo 12

With tweezers, disconnect the keyboard cable.
With tweezers, disconnect the touchpad cable.
With the Philips #00 Screwdriver, loosen the four (4) M2 x 2mm screws.
Gently remove the mouse touchpad. The fixer is left with the palm-rest and keyboard assembly.