Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Cosa ti serve
-
-
Pop out the rubber pieces and unscrew the 7 screws on the bottom of the computer.
-
Open the RAM door in the center remove the hidden screw labeled "KB" just above the RAM sticks.
-
-
-
-
There are two ribbon cables securing the keyboard - data and backlight power. Each ribbon connector must be released by flipping the black retainer up with a fingernail or nylon Uspudger before pulling out the ribbon.
-
First flip up the black retainer on the smaller connector. Slide the cable up and out of the connector.
-
Secondly, flip the black connector up on the larger connector. Slide the cable straight out of the connector, parallel to the case.
-
Remove the keyboard from the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.