1. First turn over your computer and remove all of the rubber stoppers on the back.
    • First turn over your computer and remove all of the rubber stoppers on the back.

    Aggiungi Commento

  2. Then remove all the screws that were under the rubber stoppers.
    • Then remove all the screws that were under the rubber stoppers.

    Aggiungi Commento

    • Take the screw out of the back plate.

    Aggiungi Commento

    • Remove back plate by grabbing and lifting up.

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Remove CD port by pulling it straight out.

    Aggiungi Commento

    • Remove the keyboard.

    Aggiungi Commento

    • Take screw out of the surface below the keyboard and remove the top layer of the computer off of the base.

    Aggiungi Commento

    • Remove the battery by unscrewing the 5 screws and pull straight out.

    Aggiungi Commento

    • Remove the three screws from the hard drive and remove by pulling straight out.

    Aggiungi Commento

    • Unscrew motherboard and remove the two clips.

    Aggiungi Commento

    • Flip motherboard up, unscrew the three screws, and unclip the fan.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 14

Tutti i Tempi: 108