Introduzione
This guide should be followed closely before attempting to repair your device. Follow the steps in great detail to ensure the success of your repair.
Cosa ti serve
-
-
Inspect your device and be sure that it matches the device that this guide is disassembling.
-
Familiarize yourself with the specific design of the device.
-
-
Attrezzo utilizzato in questo passaggio:Magnetic Project Mat$19.95
-
Remove the bottom panel with the metal spudger. This panel may be fused to the outer shell with a dot of adhesive.
-
Four screws fasten a metal plate to the device. Using the device magnetic mat and 54 bit (Phillips J000) driver, remove the screws.
-
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.