Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In this guide, we will be showing you how to remove and replace the Hard Drive.
Cosa ti serve
-
-
Disconnect the hard-drive cable from its connector on the system board.
-
-
-
Loosen the captive screws that secure the hard-drive assembly to the computer base.
-
-
-
Using the pull-tab, lift the hard-drive assembly out of the computer base.
-
-
-
Remove the screws that secure the hard drive(s) to the hard-drive bracket and slide the hard drive(s) out of the hard-drive bracket.
-
-
-
-
If applicable, slide the secondary hard drive into the hard-drive bracket.
-
-
-
Replace the screws that secure the primary hard drive to the hard-drive bracket.
-
-
-
If applicable, replace the screws that secure the secondary hard drive to the hard-drive bracket.
-
-
-
Place the hard-drive assembly in the computer base.
-
-
-
Tighten the captive screws that secure the hard-drive assembly to the computer base.
-
-
-
Connect the hard-drive cable to its connector on the system board.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.