Introduzione

In this guide, we will show you how to remove and replace Memory Modules 1 & 2.

Parti

Nessuna parte richiesta.

  1. WARNING:   Before working inside your computer, read the safety  information that shipped with your computer and follow the steps in Before Working Inside Your Computer. . After working  inside your computer, follow the instructions in After Working Inside Your Computer.

    Aggiungi Commento

  2. Remove the screws that secure the base cover to the computer base.
    • Remove the screws that secure the base cover to the computer base.

    Aggiungi Commento

    • Slide the base cover toward the front of the computer.

    Aggiungi Commento

    • Lift the base cover off.

    Aggiungi Commento

    • Align the tabs on the new base cover with the slots on the computer base

    Aggiungi Commento

    • Slide the base cover toward the back of the computer and align the screws holes on the base cover with the screw holes on the computer base.

    Aggiungi Commento

    • Replace the screws that secure the base cover to the computer base.

    Aggiungi Commento

  3. Aggiungi Commento

    • Remove the screws that secure the battery to the computer base.

    Aggiungi Commento

    • Using the battery cable, lift and release the battery from the tabs on the computer base.

    Aggiungi Commento

    • Turn the computer over and open the display.

    Aggiungi Commento

    • Press and hold the power button for five seconds to ground the system board.

    Aggiungi Commento

    • Slide the NEW battery under the tabs on the computer base.

    Aggiungi Commento

    • Align the screw holes on the battery with the screw holes on the computer base.

    Aggiungi Commento

    • Replace the screws that secure the battery to the computer base.

    Aggiungi Commento

    • Connect the battery cable to the system board.

    Aggiungi Commento

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. . After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • CAUTION: To avoid data loss, do not remove the hard drive while the computer is On or in Sleep state.

    • CAUTION: Hard drives are extr emely fragile. Exercise care when handling the hard drive.

    • Remove the screws that secure the hard-drive assembly to the computer base.

    Aggiungi Commento

    • Using the pull-tab, lift the hard-drive assembly off the computer base.

    Aggiungi Commento

    • Disconnect the interposer from the hard drive.

    Aggiungi Commento

    • Remove the screws that secure the hard-drive bracket to the hard drive.

    Aggiungi Commento

    • Lift the hard-drive bracket off the hard drive.

    Aggiungi Commento

    • Place the NEW hard drive in the hard-drive bracket.

    Aggiungi Commento

    • Replace the screws that secure the hard-drive bracket to the hard drive.

    Aggiungi Commento

    • Connect the interposer to the hard drive.

    Aggiungi Commento

    • Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

    Aggiungi Commento

    • Connect the interposer to the hard drive.

    Aggiungi Commento

    • Place the hard-drive assembly in the hard-drive bay.

    Aggiungi Commento

    • Align the screw holes on the hard-drive assembly with the screw holes on the computer base.

    Aggiungi Commento

    • Replace the screws that secure the hard-drive assembly to the computer base.

    Aggiungi Commento

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions After Working Inside Your Computer.

    • CAUTION: To avoid data loss, do not remove the hard drive while the computer is On or in Sleep state.

    • CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

    • Remove the screws that secure the hard-drive assembly to the computer base.

    Aggiungi Commento

    • Using the pull-tab, gently lift the hard-drive assembly.

    Aggiungi Commento

    • Lift the latch and disconnect the hard-drive cable from the system board.

    Aggiungi Commento

    • Lift the hard-drive assembly off the computer base.

    Aggiungi Commento

    • Disconnect the interposer from the hard drive.

    Aggiungi Commento

    • Remove the screws that secure the hard-drive bracket to the hard drive.

    Aggiungi Commento

    • Lift the hard-drive bracket off the hard drive.

    Aggiungi Commento

    • Place the NEW hard drive into the hard-drive bracket.

    Aggiungi Commento

    • Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

    Aggiungi Commento

    • Replace the screws that secure the hard-drive bracket to the hard drive.

    Aggiungi Commento

    • Connect the interposer to the hard-drive.

    Aggiungi Commento

    • Place the hard-drive assembly in the hard-drive bay.

    Aggiungi Commento

    • Align the screw holes on the hard-drive assembly with the screw holes on the computer base.

    Aggiungi Commento

    • Replace the screws that secure the hard-drive assembly to the computer base.

    Aggiungi Commento

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. . After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Using your fingertips, carefully spread apart the securing clips at the sides of the memory-module connector until the memory module pops up.

    Aggiungi Commento

    • Slide and remove the memory module from the memory-module connector.

    Aggiungi Commento

    • Align the notch on the NEW memory module with the tab on the memory-module connector.

    Aggiungi Commento

    • Slide the memory module into the connect or at a 45-degree angle, and press the memory module down until it clicks in place.  If you do not hear the click, remove and reinstall the memory module

    • The computer may not boot if the memory module is not installed correctly.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Terrence15

Membro da: 18/12/2017

69.919 Reputazione

442 Guide realizzate

Team

Informative Technologies Inc. Membro di Informative Technologies Inc.

Community

15 Membri

925 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 10

Tutti i Tempi: 97