Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Dell Alienware 13 R3 Rear-I/O Cover Replacement

Introduzione

In this guide, we will show you how to remove and replace the Rear-I/O Cover.

Cosa ti serve

  1. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Loosen the Screws: passo 1, immagine 1 di 1

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Loosen the five captive screws that secure the base cover to the computer base.

    Traduci

  2. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Pry the Base Cover: passo 2, immagine 1 di 1

    • Using a plastic scribe, gently pry the base cover to release the tabs on the base cover from the slots on the computer base.

    Traduci

  3. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Lift the Base Cover: passo 3, immagine 1 di 1

    • Lift the base cover off the computer base.

    Traduci

  4. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Disconnect the Battery Cable: passo 4, immagine 1 di 1

    • Using a plastic scribe, disconnect the battery cable from the system board.

    Traduci

    • Press and hold the power button for five seconds to ground the system board.

    Traduci

    • Connect the battery cable to the system board.

    Traduci

  8. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Slide the Tabs: passo 7, immagine 1 di 1

    • Slide the tabs on the NEW base cover into the slots on the computer base and snap the base cover into place

    Traduci

  9. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Tighten the Five Captive Screws: passo 8, immagine 1 di 1

    • Tighten the five captive screws that secure the base cover to the computer base.

    Traduci

  10. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Remove the Screws: passo 9, immagine 1 di 1

    • Remove the two screws (M2.5x6L) that secure the rear-I/O cover to the palm-rest assembly.

    Traduci

  11. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Using a Plastic Scribe: passo 10, immagine 1 di 1

    • Using a plastic scribe, gently release the tabs that secure rear-I/O cover to the computer base.

    Traduci

    • Slide and remove the rear-I/O cover from the computer base.

    Traduci

  13. Dell Alienware 13 R3 Rear-I/O Cover Replacement, Sliding the Rear-I/O: passo 12, immagine 1 di 1

    • Slide the NEW rear-I/O cover into the slots on the computer base and snap the rear-I/O cover into place.

    Traduci

    • Replace the two screws (M2.5x6L) that secure the rear-I/O cover to the palm-rest assembly.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Terrence15

Membro da: 12/18/17

79.121 Reputazione

441 Guide realizzate

Distintivi: 28

+25 altri distintivi

Team

RampUP America, Inc. Membro di RampUP America, Inc.

Community

42 Membri

1.985 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 825