Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Dell Alienware 13 R2 Touch Pad Replacement

Introduzione

In this guide, we will show you how to remove and replace the touch pad.

Cosa ti serve

  1. Dell Alienware 13 R2 Touch Pad Replacement, Turning Over the PC: passo 1, immagine 1 di 1

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer After working inside your computer, follow the instructions in After Working Inside Your Computer For more safety best practices, see the regulatory compliance home page.

    • Close the display and turn the computer over.

    Traduci

  2. Dell Alienware 13 R2 Touch Pad Replacement, Loosen the screws: passo 2, immagine 1 di 1

    • Loosen the captive screws that secure the base panel to the computer base.

    Traduci

  3. Dell Alienware 13 R2 Touch Pad Replacement, Releasing the Tabs: passo 3, immagine 1 di 1

    • Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.

    Traduci

  4. Dell Alienware 13 R2 Touch Pad Replacement, Disconnecting the Battery Cable: passo 4, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Disconnecting the Battery Cable: passo 4, immagine 2 di 2

    • Disconnect the battery cable from the battery-cable connector.

    • Turn the computer over.

    Traduci

  5. Dell Alienware 13 R2 Touch Pad Replacement, Power Button: passo 5, immagine 1 di 1

    • Press and hold the power button for 5 seconds to ground the system board.

    Traduci

    • Connect the battery cable to the battery-cable connector.

    Traduci

  7. Dell Alienware 13 R2 Touch Pad Replacement, Aligning the tabs: passo 7, immagine 1 di 1

    • Align the tabs on the base panel with the slots on the computer base and snap the base panel into place.

    Traduci

  8. Dell Alienware 13 R2 Touch Pad Replacement, Tighten the screws: passo 8, immagine 1 di 1

    • Tighten the captive screws that secure the base panel to the computer base.

    Traduci

  9. Dell Alienware 13 R2 Touch Pad Replacement, Removing the Screws: passo 9, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Removing the Screws: passo 9, immagine 2 di 2

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Remove the screws that secure the solid-state drive bracket to the solid-state drive assembly.

    Traduci

  10. Dell Alienware 13 R2 Touch Pad Replacement, Peel off Computer Base Tabs: passo 10, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Peel off Computer Base Tabs: passo 10, immagine 2 di 2

    • Using the pull tab, pivot the solid-state drive bracket and peel off the bracket from the tabs on the computer base.

    Traduci

  11. Dell Alienware 13 R2 Touch Pad Replacement, Disconnecting the Solid-State Drive Cable: passo 11, immagine 1 di 1

    • Using the pull tab, disconnect the solid-state drive cable from the system board.

    Traduci

  12. Dell Alienware 13 R2 Touch Pad Replacement, Removing the Solid-State Drive: passo 12, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Removing the Solid-State Drive: passo 12, immagine 2 di 2

    • Remove the screws that secure the solid-state drive assembly to the computer base.

    Traduci

  13. Dell Alienware 13 R2 Touch Pad Replacement, Lifting the Solid-State Assembly: passo 13, immagine 1 di 1

    • Lift the solid-state drive assembly off the computer base.

    Traduci

  14. Dell Alienware 13 R2 Touch Pad Replacement, Remove the Screw: passo 14, immagine 1 di 1

    • Remove the screw that secures the solid-state drive to the solid-state drive assembly.

    Traduci

  15. Dell Alienware 13 R2 Touch Pad Replacement, Lift the Solid-State Assembly.: passo 15, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Lift the Solid-State Assembly.: passo 15, immagine 2 di 2

    • Slide and lift the solid-state drive off the solid-state drive assembly.

    Traduci

  17. Dell Alienware 13 R2 Touch Pad Replacement, The New Solid-State Drive: passo 16, immagine 1 di 1

    • Slide the NEW solid-state drive into the slot on the solid-state drive assembly.

    Traduci

  18. Dell Alienware 13 R2 Touch Pad Replacement, Screw Replacement: passo 17, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Screw Replacement: passo 17, immagine 2 di 2

    • Replace the screw that secures the solid-state drive to the solid-state drive assembly.

    Traduci

  19. Dell Alienware 13 R2 Touch Pad Replacement, Align the Screws: passo 18, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Align the Screws: passo 18, immagine 2 di 2

    • Align the screw holes on the solid-state drive assembly with the screw holes on the computer base.

    Traduci

  20. Dell Alienware 13 R2 Touch Pad Replacement, Replace the Screws: passo 19, immagine 1 di 1

    • Replace the screws that secure the solid-state drive assembly to the computer base.

    Traduci

  21. Dell Alienware 13 R2 Touch Pad Replacement, Connect the Cable to the System Board: passo 20, immagine 1 di 1

    • Connect the solid-state drive cable to the system board.

    Traduci

  22. Dell Alienware 13 R2 Touch Pad Replacement, Align the Screw Holes: passo 21, immagine 1 di 1

    • Align the screw holes on the solid-state drive bracket with the screw holes on the solid-state drive assembly.

    Traduci

  23. Dell Alienware 13 R2 Touch Pad Replacement, Replace the Screws: passo 22, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Replace the Screws: passo 22, immagine 2 di 2

    • Replace the screws that secure the solid-state drive bracket to the solid-state drive assembly.

    Traduci

  24. Dell Alienware 13 R2 Touch Pad Replacement, Lifting the Latches: passo 23, immagine 1 di 1

    • Lift the latches and disconnect the keyboard and keyboard-backlight cables from the system board.

    Traduci

  25. Dell Alienware 13 R2 Touch Pad Replacement, Remove the Screws: passo 24, immagine 1 di 1

    • Remove the screws that secure the palm-rest assembly to the computer base.

    Traduci

  26. Dell Alienware 13 R2 Touch Pad Replacement, Lift the Computer Base: passo 25, immagine 1 di 1

    • Lift the computer base slightly and push the release tabs on the palm-rest assembly until it pops out.

    Traduci

    • Turn the computer over and open the display as far as possible.

    Traduci

  28. Dell Alienware 13 R2 Touch Pad Replacement, Prying the Palm-Rest Assembly: passo 27, immagine 1 di 1

    • Using a plastic scribe, pry up along the edges of the palm-rest assembly.

    Traduci

  29. Dell Alienware 13 R2 Touch Pad Replacement, Lift the Palm-Rest Assembly: passo 28, immagine 1 di 1

    • Gently lift the palm-rest assembly and turn it over.

    Traduci

  30. Dell Alienware 13 R2 Touch Pad Replacement, Lift the Connector Latch: passo 29, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Lift the Connector Latch: passo 29, immagine 2 di 2

    • Lift the connector latch and disconnect the power-button board cable from the system board.

    Traduci

  31. Dell Alienware 13 R2 Touch Pad Replacement, Lift the Palm-Rest Assembly: passo 30, immagine 1 di 1

    • Lift the palm-rest assembly off the computer base.

    Traduci

  32. Dell Alienware 13 R2 Touch Pad Replacement, Removing: passo 31, immagine 1 di 1

    • Remove the keyboard.

    • Remove the power-button board.

    • Remove the status-light board.

    • Remove the Touchpad.

    Traduci

    • Replace the touchpad.

    • Replace the status-light board.

    • Replace the power-button board.

    • Replace the keyboard.

    Traduci

    • Connect the power-button board cable to the system board.

    Traduci

  35. Dell Alienware 13 R2 Touch Pad Replacement, Align the Palm-Rest Assembly: passo 34, immagine 1 di 1

    • Align the palm-rest assembly on the computer base and snap it into place.

    Traduci

    • Close the display and turn the computer over.

    Traduci

    • Replace the screws that secure the palm-rest assembly to the computer base.

    Traduci

    • Connect the keyboard cable and the keyboard-backlight cable to the system board.

    Traduci

  39. Traduci

  40. Dell Alienware 13 R2 Touch Pad Replacement, Remove the Screws: passo 39, immagine 1 di 2 Dell Alienware 13 R2 Touch Pad Replacement, Remove the Screws: passo 39, immagine 2 di 2

    • Remove the screws that secure the touchpad to the palm-rest assembly.

    Traduci

  41. Dell Alienware 13 R2 Touch Pad Replacement, Lift the Touchpad: passo 40, immagine 1 di 1

    • Lift the touchpad off the palm-rest assembly.

    Traduci

  42. Dell Alienware 13 R2 Touch Pad Replacement, Align the Screw Holes: passo 41, immagine 1 di 1

    • Align the screw holes on the touchpad with the screw holes on the palm-rest assembly.

    Traduci

    • Replace the screws that secure the touchpad to the palm-rest assembly.

    Traduci

    • Slide the touchpad cable into the touchpad connector and press down the latch to secure the cable.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Terrence15

Membro da: 12/18/17

79.121 Reputazione

441 Guide realizzate

Distintivi: 28

+25 altri distintivi

Team

RampUP America, Inc. Membro di RampUP America, Inc.

Community

42 Membri

1.985 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 279