Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Close the display and turn the computer over.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen the captive screws that secure the base panel to the computer base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the battery cable from the battery-cable connector.
-
Turn the computer over.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press and hold the power button for 5 seconds to ground the system board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Connect the battery cable to the battery-cable connector.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Align the tabs on the base panel with the slots on the computer base and snap the base panel into place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Tighten the captive screws that secure the base panel to the computer base.
-