Salta al contenuto principale

Dell 1907FPc Monitor Power Supply Replacement

Cosa ti serve

  1. Dell 1907FPc Monitor Power Supply Replacement, Power Supply: passo 1, immagine 1 di 1
    • Carefully place the monitor face down on a flat surface, being careful to protect the display.

    • Remove the four 10 mm Phillips #2 screws from the back panel.

  2. Dell 1907FPc Monitor Power Supply Replacement: passo 2, immagine 1 di 1
    • Flip the monitor back over, so that the display is facing you.

    • Use a spudger to remove the front bezel by unsnapping it in a counter clockwise fashion, starting at the bottom right, and ending at the button panel.

  3. Dell 1907FPc Monitor Power Supply Replacement: passo 3, immagine 1 di 1
    • Slowly unsnap the bezel around the buttons.

    • Be careful to not fully remove the bezel here, because a ribbon cable attaches the buttons to the monitor.

  4. Dell 1907FPc Monitor Power Supply Replacement: passo 4, immagine 1 di 1
    • Carefully flip the monitor back over, making sure to keep the front bezel in place.

    • Lift the back cover off of the rest of the monitor.

  5. Dell 1907FPc Monitor Power Supply Replacement: passo 5, immagine 1 di 3 Dell 1907FPc Monitor Power Supply Replacement: passo 5, immagine 2 di 3 Dell 1907FPc Monitor Power Supply Replacement: passo 5, immagine 3 di 3
    • Locate the USB port cover on the right hand side of the monitor.

    • Remove the one 5 mm Phillips #2 screw.

    • Remove the USB port cover by sliding it out and away from the monitor.

  6. Dell 1907FPc Monitor Power Supply Replacement: passo 6, immagine 1 di 2 Dell 1907FPc Monitor Power Supply Replacement: passo 6, immagine 2 di 2
    • Disconnect the USB ports by gentling grasping and pulling on the connector.

  7. Dell 1907FPc Monitor Power Supply Replacement: passo 7, immagine 1 di 1
    • Remove the five 5 mm Phillips #2 screws from the back panel.

  8. Dell 1907FPc Monitor Power Supply Replacement: passo 8, immagine 1 di 2 Dell 1907FPc Monitor Power Supply Replacement: passo 8, immagine 2 di 2
    • Remove the four 4 mm Phillips #2 screws that secure the monitor mount release mechanism to the panel.

    • Set this mechanism off to the side, taking care to keep it all in one piece.

  9. Dell 1907FPc Monitor Power Supply Replacement: passo 9, immagine 1 di 2 Dell 1907FPc Monitor Power Supply Replacement: passo 9, immagine 2 di 2
    • Use a 5 mm nut driver to remove the four 12 mm standoff screws securing the video connectors to the panel.

  10. Dell 1907FPc Monitor Power Supply Replacement: passo 10, immagine 1 di 2 Dell 1907FPc Monitor Power Supply Replacement: passo 10, immagine 2 di 2
    • Use the tweezers to lift up the seven security tabs that secure the back panel to the rest of the monitor.

    • If the security tabs are held down too tightly, use the spudger to pry them up, and then finish them off with the tweezers.

  11. Dell 1907FPc Monitor Power Supply Replacement: passo 11, immagine 1 di 3 Dell 1907FPc Monitor Power Supply Replacement: passo 11, immagine 2 di 3 Dell 1907FPc Monitor Power Supply Replacement: passo 11, immagine 3 di 3
    • Lift up on the back panel to remove it from the rest of the monitor.

    • Be careful when doing so, as the edges of the back panel can be very sharp.

  12. Dell 1907FPc Monitor Power Supply Replacement: passo 12, immagine 1 di 2 Dell 1907FPc Monitor Power Supply Replacement: passo 12, immagine 2 di 2
    • The power supply has several large capacitors (they look like little cylinders), that can shock you if they discharge. Be careful not to touch them as you continue to work.

    • Use the tweezers to remove the four connectors from the power supply board.

  13. Dell 1907FPc Monitor Power Supply Replacement: passo 13, immagine 1 di 1
    • Remove the five 7 mm Phillips #2 screws from the power supply board.

  14. Dell 1907FPc Monitor Power Supply Replacement: passo 14, immagine 1 di 2 Dell 1907FPc Monitor Power Supply Replacement: passo 14, immagine 2 di 2
    • Open up the clip securing the wires running between the power supply and video boards.

    • Gently remove the connector running from the video board to the power supply board.

  15. Dell 1907FPc Monitor Power Supply Replacement: passo 15, immagine 1 di 2 Dell 1907FPc Monitor Power Supply Replacement: passo 15, immagine 2 di 2
    • The power supply board can now be removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Geoff Wacker

Membro da: 09/30/13

89.843 Reputazione

89 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 28

Tutti i Tempi: 6,186