Aggiusta la tua roba Comunità Store

Definitive Technology W7 Speaker Replacement

Introduzione

This guide will teach you how to remove the speaker from the Definitive Technology W7

Cosa ti serve

  1. Definitive Technology W7 Speaker Replacement, Speaker: passo 1, immagine 1 di 1

    • Use the metal spudger to pry off the panel at the top of the device.

    • The top panel has the device logo in the center.

    • Use the flat end of the metal spudger and place it between the gaps of the top panel and slowly pry the panel off.

    Modifica

  2. Definitive Technology W7 Speaker Replacement: passo 2, immagine 1 di 1

    • Remove the thirteen Phillips #0 screws.

    Modifica

  3. Definitive Technology W7 Speaker Replacement: passo 3, immagine 1 di 1

    • Remove the black panel.

    Modifica

  4. Definitive Technology W7 Speaker Replacement: passo 4, immagine 1 di 2 Definitive Technology W7 Speaker Replacement: passo 4, immagine 2 di 2

    • After you remove the black panel, you will see that the device is covered with a gray mesh, secured with a drawstring.

    • Flick the switch on the middle of the lock down to loosen the sack.

    Modifica

  6. Definitive Technology W7 Speaker Replacement: passo 5, immagine 1 di 1

    • After you have flicked the switch loosen the sack and pull the sack down which will reveal the speaker.

    Modifica

  7. Definitive Technology W7 Speaker Replacement: passo 6, immagine 1 di 1

    • Remove the four screws on top of the device on each corner with a Phillips #0 screwdriver.

    Modifica

  8. Definitive Technology W7 Speaker Replacement: passo 7, immagine 1 di 1

    • Gently lift the top cover off the device.

    Modifica

  9. Definitive Technology W7 Speaker Replacement: passo 8, immagine 1 di 1

    • If you now look inside the device, you will see the speaker which is the large cylinder on the inner side of the device.

    Modifica

  10. Definitive Technology W7 Speaker Replacement: passo 9, immagine 1 di 2 Definitive Technology W7 Speaker Replacement: passo 9, immagine 2 di 2

    • Remove the four Phillips #0 screws around the speaker holding it in place.

    • Now lay the device on its side with the speaker facing upward, then unscrew the screws around the speaker.

    Modifica

  11. Definitive Technology W7 Speaker Replacement: passo 10, immagine 1 di 1

    • Stand the device upright and carefully pull the speaker out of the device with the wires still intact.

    Modifica

  12. Definitive Technology W7 Speaker Replacement: passo 11, immagine 1 di 1

    • Now grab the end of the wire connecting the device to the speaker itself.

    • Slowly and carefully pull the wires away from the speaker.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Jamari Brewster

Membro da: 10/26/22

193 Reputazione

1 Guida realizzata

Distintivi: 3

Team

UMass Dartmouth, Team 2-5, Petersen Fall 2022 Membro di UMass Dartmouth, Team 2-5, Petersen Fall 2022

UMASSD-PETERSEN-F22S2G5

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 224