Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Begin by thoroughly wetting the badge and surrounding area with soapy water.
-
Once the badge is fully wetted, wedge a strand of floss or fishing line between the car panel and the wedge.
-
Draw the floss back and forth in a sawing motion and simultaneously pull it along the badge until it detaches from the panel.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use soapy water and the rough side of a sponge to remove the leftover adhesive. Other products such as Goo Gone or Goof Off are also excellent adhesive removers.
-
Annulla: non ho completato questa guida.
Altre 21 persone hanno completato questa guida.
5 Commenti
This thanks for this post, many of people have craze to use custom badge. This is good think you can get choice to use any of custom badge to stick on car with the Instant Adhesives.
I find ifixit's conclusion to be rather comical; To reassemble your device, follow these instructions in reverse order.
Rather than using an abrasive washing up sponge, try using a soft cloth with WD40. It will dissolve the remove the adhesive without risking damaging the paintwork.