Aggiusta la tua roba Comunità Store

DeWalt DW936 Plastic Cover Replacement

Introduzione

This guide will show you how to take off the plastic cover on the saw, so you can get to the inside components.

Cosa ti serve

  1. DeWalt DW936 Plastic Cover Replacement, Plastic Cover: passo 1, immagine 1 di 1

    • Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.

    Modifica

  2. DeWalt DW936 Plastic Cover Replacement: passo 2, immagine 1 di 1

    • Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.

    Modifica

  4. DeWalt DW936 Plastic Cover Replacement: passo 3, immagine 1 di 1

    • Remove Allen Key.

    Modifica

  5. DeWalt DW936 Plastic Cover Replacement: passo 4, immagine 1 di 1

    • Unscrew the black plastic knob underneath the trigger.

    Modifica

  6. DeWalt DW936 Plastic Cover Replacement: passo 5, immagine 1 di 1

    • Grab hold of the black air filter portion and pull off.

    Modifica

  7. DeWalt DW936 Plastic Cover Replacement: passo 6, immagine 1 di 1

    • This is what the inside of the saw looks like.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Scott Weinhardt

Membro da: 01/25/17

603 Reputazione

5 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 8-2, Banghart Winter 2017 Membro di Cal Poly, Team 8-2, Banghart Winter 2017

CPSU-BANGHART-W17S8G2

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 363