Aggiusta la tua roba Comunità Store

DeWalt DW660 Motor Brushes Replacement

Introduzione

The motor inside the DW660 uses two carbon brushes which transfer electricity to the rotor by sliding over the copper commutator. The brushes wear out over time with regular use, so they will eventually need to be replaced.

Cosa ti serve

  1. DeWalt DW660 Motor Brushes Replacement, Motor Brushes: passo 1, immagine 1 di 2 DeWalt DW660 Motor Brushes Replacement, Motor Brushes: passo 1, immagine 2 di 2

    • Remove the four 19mm T20 Torx screws at the rear of the device.

    Modifica

  2. DeWalt DW660 Motor Brushes Replacement: passo 2, immagine 1 di 3 DeWalt DW660 Motor Brushes Replacement: passo 2, immagine 2 di 3 DeWalt DW660 Motor Brushes Replacement: passo 2, immagine 3 di 3

    • Remove the other part of the back casing.

    • Unplug the black and white power wires from the motor.

    Modifica

  4. DeWalt DW660 Motor Brushes Replacement: passo 3, immagine 1 di 2 DeWalt DW660 Motor Brushes Replacement: passo 3, immagine 2 di 2

    • Pinch the blue brush wire between two fingers.

    • Pull on the wire, removing them from the motor.

    Modifica

  5. DeWalt DW660 Motor Brushes Replacement: passo 4, immagine 1 di 2 DeWalt DW660 Motor Brushes Replacement: passo 4, immagine 2 di 2

    • Using the metal spudger, lift up the coil spring that holds the carbon brushes in place.

    • While the spring is lifted up, remove the carbon brush by simply sliding it out of the slot.

    Modifica

  6. DeWalt DW660 Motor Brushes Replacement: passo 5, immagine 1 di 2 DeWalt DW660 Motor Brushes Replacement: passo 5, immagine 2 di 2

    • Repeat steps 3 and 4 to remove the other carbon brush.

    • When installing the new carbon brushes, make sure each brushes' lead wire is plugged into opposite ends of the motor.

    • Refer to the photos for visual assistance.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Joseph Pacitto

Membro da: 03/23/16

239 Reputazione

2 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

UMass Dartmouth, Team 2-7, Isaacson Spring 2016 Membro di UMass Dartmouth, Team 2-7, Isaacson Spring 2016

UMASSD-ISAACSON-S16S2G7

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,389