Aggiusta la tua roba Comunità Store

DeWALT Hammer Drill DW511 Chuck Replacement

Cosa ti serve

  1. DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: passo 1, immagine 1 di 3 DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: passo 1, immagine 2 di 3 DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: passo 1, immagine 3 di 3

    • Remove two 45 mm T20 Torx screws.

    • Remove one 30 mm T20 Torx screw.

    Traduci

  2. DeWALT Hammer Drill DW511 Chuck Replacement: passo 2, immagine 1 di 1

    • Pull off the top case and set it aside.

    Traduci

  4. DeWALT Hammer Drill DW511 Chuck Replacement: passo 3, immagine 1 di 3 DeWALT Hammer Drill DW511 Chuck Replacement: passo 3, immagine 2 di 3 DeWALT Hammer Drill DW511 Chuck Replacement: passo 3, immagine 3 di 3

    • Grab the gear case cover and gently pull it out just enough to where it exposes the lever assembly.

    • It is important that the brushes are removed before you do this step or you may damage your brushes.

    • The lever assembly can now be lifted out.

    Traduci

  5. DeWALT Hammer Drill DW511 Chuck Replacement: passo 4, immagine 1 di 1

    • With the old lever assembly removed you can now replace it with a new one.

    Traduci

  6. DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: passo 5, immagine 1 di 3 DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: passo 5, immagine 2 di 3 DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: passo 5, immagine 3 di 3

    • Gently separate the chuck and plastic housing from the hammer drill body.

    • The removal of the screw from the chuck to separate the plastic housing requires hand strength and specialized tools.

    • The plastic housing is prone to damage if excessive force is applied during the replacement.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 605