Introduzione

Use this guide to replace a broken propellor on your DJI Phantom. When replacing, be sure to match the original propellor spin direction.

Strumenti

Parti

Press down on battery door release tab to flip the battery door open.
  • Press down on battery door release tab to flip the battery door open.

Aggiungi Commento

Pull out the battery pack.
  • Pull out the battery pack.

  • Avoid pulling on the battery wires, excess stress may break the wires, damage the power connectors, or crack the internal solder joints.

Aggiungi Commento

  • Pull the two halves of the XT60 power connector apart.

    • It's a tight fit, so be careful not to hit your drone or yank on the cables when it releases!

Aggiungi Commento

  • Silver-topped propeller collets unscrew counter-clockwise

  • Black-topped propeller collets unscrew clockwise

Aggiungi Commento

  • For propellors with silver collets: Use a 12 mm wrench or socket to loosen silver collets in the counter-clockwise direction.

  • Once free, unscrew and remove the collet.

Aggiungi Commento

  • For propellors with black collets: Use a 12 mm wrench or socket to loosen black collets in the clockwise direction.

  • Once free, unscrew and remove the collet.

Aggiungi Commento

  • Gently press down the motor shaft and lift the propeller up to remove it.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

David Hoyt

Membro da: 09/04/2010

3.626 Reputazione

43 Guide realizzate

Team

Cal Poly, Team 25-89, Amido Spring 2010 Membro di Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 Membri

52 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 9

Tutti i Tempi: 762