Salta al contenuto principale

DJI Mini 2 Gimbal Calibration

Istruzioni Video


To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.


Membro da: 10/27/19

24.612 Reputazione

92 Guide realizzate

17 Commenti

Hi I tried this on my mini 1, after flex cable replacement (motherboard and gimbal are stock and fine) all went well I managed to calibrate the gimbal trought this phyton scrypt. But in the dji fly app it is still the same issue gimbal does not work but I dont understand why. Initial startup calibration works on all axes of the gimbal but then pops up the errors 40012, 30066 and gimbal is stuck in the position and does not want to work due to this error. Help...

Dominik Bukovčák - Replica

Update I desoldered the old chip from broken flex cable and replaced it with the chip on the new cable and it works :) so that is another way how to do it. It may not be easy task for everyone but maybe this information will help somebody.

Dominik Bukovčák - Replica

unfortunately i saw this to late. i threw the old cable into the waste yesterday. anyone has an other solution?

Shity Brown -

Hey. Hope you all doing well.

Could you perhaps share a pic of the cable with the specific chip that was removed possibly?


Ashraf Rogers -

This is NOT for the DJI Mini 2 the has not the mini 2 listed in the comm_og_service_tool .
Tried with mini 1, didn't work.

Sebastian - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 37

Ultimi 7 Giorni: 162

Ultimi 30 Giorni: 795

Tutti i Tempi: 11,720