Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

DBPOWER T20 Speaker Replacement

Cosa ti serve

  1. DBPOWER T20 Speaker Replacement, DBPOWER T20 Disassembly: passo 1, immagine 1 di 1
    • Flip the device and lay flat.

  2. DBPOWER T20 Speaker Replacement: passo 2, immagine 1 di 1
    • Remove the four (9 mm) screws with a PH2 screwdriver.

    • Remove the two (7 mm) located with a PH2 screwdriver.

  3. DBPOWER T20 Speaker Replacement: passo 3, immagine 1 di 3 DBPOWER T20 Speaker Replacement: passo 3, immagine 2 di 3 DBPOWER T20 Speaker Replacement: passo 3, immagine 3 di 3
    • Flip the device over and pry the top off with a plastic opening tool.

  4. DBPOWER T20 Speaker Replacement: passo 4, immagine 1 di 1
    • Remove the ribbon cable connecting the motherboard to the button control board by gently pulling it from its connector.

  5. DBPOWER T20 Speaker Replacement: passo 5, immagine 1 di 2 DBPOWER T20 Speaker Replacement: passo 5, immagine 2 di 2
    • Remove four (6 mm) screws connecting the motherboard using a J0 screwdriver.

  6. DBPOWER T20 Speaker Replacement: passo 6, immagine 1 di 3 DBPOWER T20 Speaker Replacement: passo 6, immagine 2 di 3 DBPOWER T20 Speaker Replacement: passo 6, immagine 3 di 3
    • Remove the two cables connected to the motherboard: black power cable and the red/black fan cable.

    • the black cable requires more force to remove than the other cables.

  7. DBPOWER T20 Speaker Replacement: passo 7, immagine 1 di 2 DBPOWER T20 Speaker Replacement: passo 7, immagine 2 di 2
    • Lift the black latch on the ZIF connector and remove the ribbon cable that attaches the digitizer to the motherboard.

  8. DBPOWER T20 Speaker Replacement: passo 8, immagine 1 di 1
    • Raise motherboard by lifting sideways and then up to avoid the ports.

  9. DBPOWER T20 Speaker Replacement: passo 9, immagine 1 di 2 DBPOWER T20 Speaker Replacement: passo 9, immagine 2 di 2
    • Remove wires attaching the piezoelectric speakers to the motherboard.

  10. DBPOWER T20 Speaker Replacement: passo 10, immagine 1 di 2 DBPOWER T20 Speaker Replacement: passo 10, immagine 2 di 2
    • Remove the five screws securing the black plastic cover with a J0 screwdriver.

    • Lift up and out to remove.

  11. DBPOWER T20 Speaker Replacement, Speaker: passo 11, immagine 1 di 2 DBPOWER T20 Speaker Replacement, Speaker: passo 11, immagine 2 di 2
    • Remove the two (3 mm) screws connecting the bracket down and pull out the reflector, using a J0 Philips Head Screwdriver.

  12. DBPOWER T20 Speaker Replacement: passo 12, immagine 1 di 3 DBPOWER T20 Speaker Replacement: passo 12, immagine 2 di 3 DBPOWER T20 Speaker Replacement: passo 12, immagine 3 di 3
    • Slide the mirror straight up to remove.

  13. DBPOWER T20 Speaker Replacement: passo 13, immagine 1 di 3 DBPOWER T20 Speaker Replacement: passo 13, immagine 2 di 3 DBPOWER T20 Speaker Replacement: passo 13, immagine 3 di 3
    • Slide out the power source and disconnect its cables from the power jack and the light.

  14. DBPOWER T20 Speaker Replacement: passo 14, immagine 1 di 3 DBPOWER T20 Speaker Replacement: passo 14, immagine 2 di 3 DBPOWER T20 Speaker Replacement: passo 14, immagine 3 di 3
    • Remove the screws holding down the first speaker with a J0 screwdriver.

    • Remove the screws holding down the second speaker down.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Ryan Goldin

Membro da: 02/15/18

245 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S16-G2, Boczar Spring 2018 Membro di USF Tampa, Team S16-G2, Boczar Spring 2018

USFT-BOCZAR-S18S16G2

5 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 423