Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Place the CygoLite on a flat surface with the bottom side facing up. Locate the four screws on the bottom of the device. Unscrew them with a Phillips head screwdriver and remove the bottom casing.
    • Place the CygoLite on a flat surface with the bottom side facing up.

    • Locate the four screws on the bottom of the device.

    • Unscrew them with a Phillips head screwdriver and remove the bottom casing.

  2. Kit di riparazione per Android

    A new screen or battery is one kit away.

    Acquista ora

    Kit di riparazione per Android

    A new screen or battery is one kit away.

    Acquista ora
  3. Locate the rubber gasket on the side of the device. Place your new replacement rubber gasket onto the side of the casing and gently place the top of the case back on top of it.
    • Locate the rubber gasket on the side of the device.

    • Place your new replacement rubber gasket onto the side of the casing and gently place the top of the case back on top of it.

    • Be sure to line up the grooves in the casing with the grooves on the rubber gasket.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Trent Vigar

Membro da: 22/10/2012

101 Reputazione

1 Guida realizzata

Team

Clemson, Team 14-3, Benson Fall 2012 Membro di Clemson, Team 14-3, Benson Fall 2012

CLEM-BENSON-F12S14G3

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 242