Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the sixteen 5 mm length screws using the Phillips head #2.
-
One of the screws may be located underneath a manufacturer's sticker.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the metal backing located directly underneath the white plastic casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the ribbon cable that connects the LED board to the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully remove the LED board, which should now come free from the casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Now the cell membrane should be exposed, gently lift this part and ensure that the rubber buffers are all intact to the membrane, if not pick up the buffers and set to the side.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the motherboard and its attached cable from the plastic casing. The cord should now come free to replace.
-