Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

CyberHome CH-DVD 300 Back Panel Replacement

Cosa ti serve

  1. CyberHome CH-DVD 300 Back Panel Replacement, Top Panel: passo 1, immagine 1 di 2 CyberHome CH-DVD 300 Back Panel Replacement, Top Panel: passo 1, immagine 2 di 2
    • Turn the DVD player off. Unplugging the DVD player while it is on may result in damage to the DVD player or an inserted CD.

    • Unplug the DVD player from the wall socket.

    • Locate the 15mm Phillips screws on the left side (1 screw), right side (1 screw), and back (4 screws) of the DVD Player. Use the appropriate Phillips head screwdriver to remove the six screws.

  2. CyberHome CH-DVD 300 Back Panel Replacement: passo 2, immagine 1 di 2 CyberHome CH-DVD 300 Back Panel Replacement: passo 2, immagine 2 di 2
    • Remove the top panel of the DVD Player by:

    • Sliding the top panel backwards.

    • Gently lifting the back of the top panel up.

  3. CyberHome CH-DVD 300 Back Panel Replacement, Back Panel: passo 3, immagine 1 di 2 CyberHome CH-DVD 300 Back Panel Replacement, Back Panel: passo 3, immagine 2 di 2
    • Remove the remaining screws on the back of the DVD player:

    • There will be four 15 mm screws and two 6.3 mm screws.

  4. CyberHome CH-DVD 300 Back Panel Replacement: passo 4, immagine 1 di 1
    • Remove the back panel by:

    • Lifting up on the back panel.

    • Pulling the back panel backwards from the DVD player.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 6-5, Forte Spring 2014 Membro di Cal Poly, Team 6-5, Forte Spring 2014

CPSU-FORTE-S14S6G5

5 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 560