Cuisinart TOA-60FR Power Cord Replacement

Introduzione

If you are having trouble turning on your Cuisinart TOA-60Fr, it could be the power cord. The steps in this guide will walk you through the process of replacing the power cord. This does necessitate some wire stripping ability as well as knowledge of hot and natural electoral wire.

Cosa ti serve

Passo 1 Outside removal

Cuisinart TOA-60FR Power Cord Replacement, Outside removal: passo 1, immagine 1 di 1

Using a 25-hexagon head, unscrew these 7.31 mm three screws.

Modifica

Passo 2

Using a Phillips #1 screwdriver, remove all these 7.31 mm screws.
Pull off the back.

Modifica

Passo 3

Cuisinart TOA-60FR Power Cord Replacement: passo 3, immagine 3 di 3

Flip the oven upside down.
Pick the grey stoppers out with a sprudger.
Using a Phillips #1 screwdriver, remove these three 11 mm screws.

Modifica

Passo 4

Unscrew all of the 11.05 mm screws that connect the outer shell to the device.

Modifica

Passo 5

Cuisinart TOA-60FR Power Cord Replacement: passo 5, immagine 3 di 3

Pull the top piece off.
Push down before pulling up to release the tabs.

Modifica

Passo 6 Power Cord

Cuisinart TOA-60FR Power Cord Replacement, Power Cord: passo 6, immagine 1 di 1

Take the needle nose pliers and cut off the crimped-on-wire connectors.
Pressed down hard. These wires are thick.
These are crimped on wire conncetors so they can not be twisted off. The only way to remove them is by cutting off the wire.

Modifica

Passo 7

Cuisinart TOA-60FR Power Cord Replacement: passo 7, immagine 3 di 3

Strip the wires back with wire strippers. Or carefully take the needle nose pliers and cut gently to only make a mark on the jacket and not the wires. Then pull with the pliers to remove the jacket.

Modifica