Introduzione
This guide will lead you through the process of replacing a dead or dying motor in your Cuisinart Mini-Prep DLC-2A.
Cosa ti serve
-
-
Remove the back panel using a Phillips #1 Screwdriver on the four screws that hold it in place.
-
-
-
Remove the three screws that hold the motor to the top case using a Phillips #1 screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.