Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws (2.5 mm) on the top and bottom of the device using a Phillips #0 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Run the spudger along the cover and pry.
-
The button pad may fall off when the cover is removed.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to separate the metal tabs that hold the screen in place on the right side.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Put the screen face down so you can see where the ribbon cables are attached.
-
Remove the red sticker that covers the ribbon cable connections.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to get underneath the black flap on the larger ribbon cable connection and lift it.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to slide the two small gray tabs away from the ribbon cable connection.
-
Remove the screen from the device.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.