Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide will show you how to remove and install the keypad for your device. Use this guide if your buttons stop working because the keypad is broken.
Cosa ti serve
-
-
Remove the two screws (2.5 mm) on the top and bottom of the device using a Phillips #0 screwdriver.
-
-
-
Use a spudger to separate the metal tabs that hold the screen in place on the right side.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.