Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Creative Zen Vision W Front Cover Replacement

Cosa ti serve

  1. Creative Zen Vision W Front Cover Replacement, Front Cover: passo 1, immagine 1 di 1
    • Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.

  2. Creative Zen Vision W Front Cover Replacement: passo 2, immagine 1 di 1
    • Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.

  3. Creative Zen Vision W Front Cover Replacement: passo 3, immagine 1 di 3 Creative Zen Vision W Front Cover Replacement: passo 3, immagine 2 di 3 Creative Zen Vision W Front Cover Replacement: passo 3, immagine 3 di 3
    • Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen.

    • When the cover has been lifted off the screen, use your hands to remove it from the device.

    • The button pad may fall off when the cover is removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Gabriele Pregadio

Membro da: 04/17/13

1 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 17-2, Regan Spring 2013 Membro di Cal Poly, Team 17-2, Regan Spring 2013

CPSU-REGAN-S13S17G2

4 Membri

8 Guide realizzate

Un commento

Fantastic but does anyone know where I can get this part?

VegetaFlex4Fitness - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 424