Salta al contenuto principale

Creality Ender 3 Bracket Plate of Y-Axis Motor Replacement

Cosa ti serve

  1. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement, Bracket Plate of Y-Axis Motor: passo 1, immagine 1 di 1
    • Place the bed plate in the middle of your Ender 3. Do this manually by gently pushing it to the middle.

  2. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 2, immagine 1 di 2 Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 2, immagine 2 di 2
    • Or alternatively, place the bed in the center by turning your Ender 3 on.

  3. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 3, immagine 1 di 3 Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 3, immagine 2 di 3 Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 3, immagine 3 di 3
    • Turn on the printer, and click the button to the screen shown in the photo.

    • Rotate the button clockwise to "Prepare".

    • Rotate the button clockwise to AutoHome. This should set your bedplate to 0 on both X & Y axes.

  4. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 4, immagine 1 di 1
    • Unplug the wire that is connected to the Y motor.

  5. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 5, immagine 1 di 1
    • Remove the two M4*20 screws from the back end of the Y-axis bar using an 8 mm Allen Wrench. The side of the display should be facing you.

  6. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 6, immagine 1 di 1
    • Remove the four M3*6 screws that are attaching the motor to the Y-axis motor using an 8 mm Allen Wrench.

  7. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 7, immagine 1 di 1
    • Buy a new bracket with the same brand (depending on the severity of the bend of the bracket) or straighten the metal on your own.

  8. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 8, immagine 1 di 2 Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 8, immagine 2 di 2
    • If you choose to fix it on your own, slip the bracket in between a workshop bench clamp. Apply enough pressure between two thick blocks of metal to straighten it.

    • Use vise-grips to aid in stabilizing the metal as you force the metal to straighten.

  9. Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 9, immagine 1 di 2 Creality Ender 3  Bracket Plate of Y-Axis Motor Replacement: passo 9, immagine 2 di 2
    • Repeat, Steps 6-11 in reverse to put the bracet back on the Y motor and back on the Ender 3.

    • Turn on Ender 3 to see if you did it correctly. Try to also print something too!

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 18

Ultimi 30 Giorni: 53

Tutti i Tempi: 1,727