Aggiusta la tua roba Comunità Store

Craig Electronics CMP773 Screen Replacement

Introduzione

It is common for screens on tablets to scratch, crack, and break from use. Also, screens may malfunction or stop working for a number of reasons. This step by step guide will lead you through disassembling your Craig Electronics CMP773 in order to replace the screen.

Cosa ti serve

  1. Craig Electronics CMP773 Screen Replacement, Screen: passo 1, immagine 1 di 2 Craig Electronics CMP773 Screen Replacement, Screen: passo 1, immagine 2 di 2

    • Remove two screws on the charging port side of the tablet using the Phillips #00 screwdriver.

    Modifica

  2. Craig Electronics CMP773 Screen Replacement: passo 2, immagine 1 di 3 Craig Electronics CMP773 Screen Replacement: passo 2, immagine 2 di 3 Craig Electronics CMP773 Screen Replacement: passo 2, immagine 3 di 3

    • Insert a plastic opening tool between the screen and the back of the tablet.

    • Insert another opening tool along the same side of the tablet and pry them in opposite directions until the casing pops.

    • Once roughly half of the case has been unlatched, it can be removed by hand.

    Modifica

  3. Craig Electronics CMP773 Screen Replacement: passo 3, immagine 1 di 2 Craig Electronics CMP773 Screen Replacement: passo 3, immagine 2 di 2

    • Use the spudger to gently pry the camera from the casing.

    Modifica

  4. Craig Electronics CMP773 Screen Replacement: passo 4, immagine 1 di 2 Craig Electronics CMP773 Screen Replacement: passo 4, immagine 2 di 2

    • Using your finger, remove the clamp that connects the screen power rib to the motherboard.

    • Using needle nose pliers, remove the ribbon.

    Modifica

  6. Craig Electronics CMP773 Screen Replacement: passo 5, immagine 1 di 3 Craig Electronics CMP773 Screen Replacement: passo 5, immagine 2 di 3 Craig Electronics CMP773 Screen Replacement: passo 5, immagine 3 di 3

    • Remove the second screen power connection from the motherboard using the same procedure as step 4.

    Modifica

  7. Craig Electronics CMP773 Screen Replacement: passo 6, immagine 1 di 3 Craig Electronics CMP773 Screen Replacement: passo 6, immagine 2 di 3 Craig Electronics CMP773 Screen Replacement: passo 6, immagine 3 di 3

    • Remove four screws from the motherboard using the Phillips #00 screwdriver.

    Modifica

  8. Craig Electronics CMP773 Screen Replacement: passo 7, immagine 1 di 2 Craig Electronics CMP773 Screen Replacement: passo 7, immagine 2 di 2

    • Remove a single screw from the speaker using the Phillips #00 screwdriver.

    • Pry up on the locking tabs with the flat spudger.

    Modifica

  9. Craig Electronics CMP773 Screen Replacement: passo 8, immagine 1 di 1

    • Using needle nose pliers, remove the ground wire from the casing.

    Modifica

  10. Craig Electronics CMP773 Screen Replacement: passo 9, immagine 1 di 1

    • Using the plastic opening tool, remove the battery.

    Modifica

  11. Craig Electronics CMP773 Screen Replacement: passo 10, immagine 1 di 2 Craig Electronics CMP773 Screen Replacement: passo 10, immagine 2 di 2

    • With all screws and components removed, gently remove the motherboard from the casing.

    Modifica

  12. Craig Electronics CMP773 Screen Replacement: passo 11, immagine 1 di 3 Craig Electronics CMP773 Screen Replacement: passo 11, immagine 2 di 3 Craig Electronics CMP773 Screen Replacement: passo 11, immagine 3 di 3

    • Insert the spudger in between the screen and case. Work your way around the outside of the screen.

    Modifica

  13. Craig Electronics CMP773 Screen Replacement: passo 12, immagine 1 di 3 Craig Electronics CMP773 Screen Replacement: passo 12, immagine 2 di 3 Craig Electronics CMP773 Screen Replacement: passo 12, immagine 3 di 3

    • Grasp the exposed screen corner and gently separate the screen from the housing.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Justin mersch

Membro da: 11/07/19

205 Reputazione

1 Guida realizzata

Distintivi: 3

Team

IUPUI, Team S3-G4, Harley Fall 2019 Membro di IUPUI, Team S3-G4, Harley Fall 2019

IUPUI-HARLEY-F19S3G4

4 Membri

3 Guide realizzate

Un commento

What kind of battery does this device specifically use

Kris Miller - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 194