Aggiusta la tua roba Comunità Store

Craftsman Model 315.10721 Switch Replacement

Introduzione

The switch is an essential piece of the Craftsman Model 315.10721. Even if the motor and inner hardware is working, if the switch is broken, the saw will not start.

Cosa ti serve

  1. Craftsman Model 315.10721 Switch Replacement, Switch: passo 1, immagine 1 di 1

    • Remove the two 1" Phillips screws using a #1 Phillips screwdriver.

    • Remove the three 1/2" Phillips screws using a #1 Phillips screwdriver.

    • Once the five screws are removed, lift the handle cover from the saw.

    Traduci

  3. Craftsman Model 315.10721 Switch Replacement: passo 2, immagine 1 di 1

    • Using a Phillips #1 screwdriver, remove the 1/2" silver screw that is securing the switch.

    Traduci

  4. Craftsman Model 315.10721 Switch Replacement: passo 3, immagine 1 di 1

    • Using a Phillips #00 screwdriver or a small diameter screwdriver, gently insert it into the leads. When the screwdriver is inserted into the lead, it will release the wire.

    • The leads are where the black and white wires from the switch are plugged in.

    • Release both sets of the black and white wires and gently pull them from the leads.

    • To install the new switch, insert the wires of the new cord in the same way that they were removed.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Riley Hilliker

Membro da: 10/14/14

557 Reputazione

5 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

Cal Poly, Team 4-47, Amido Fall 2014 Membro di Cal Poly, Team 4-47, Amido Fall 2014

CPSU-AMIDO-F14S4G47

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 1,299