Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Corsair Katar Disassembly

Cosa ti serve

  1. Corsair Katar Disassembly, Corsair Katar Disassembly: passo 1, immagine 1 di 2 Corsair Katar Disassembly, Corsair Katar Disassembly: passo 1, immagine 2 di 2
    • Unplug your mouse before starting.

    • Flip the mouse over so the bottom is facing up.

  2. Corsair Katar Disassembly: passo 2, immagine 1 di 1
    • Remove the three skates on the bottom of the mouse using the plastic opening tools.

    • Skates will be very sticky.

  3. Corsair Katar Disassembly: passo 3, immagine 1 di 2 Corsair Katar Disassembly: passo 3, immagine 2 di 2
    • Use the JIS 0 screwdriver to remove the four 5 mm screws on the bottom of the mouse.

  4. Corsair Katar Disassembly: passo 4, immagine 1 di 1
    • Detach the bottom of the mouse from the upper shell.

    • Remove the shell slowly so as not to damage the white DPI cable inside the mouse.

    • Use the plastic opening tool to detach the white DPI sensor cable from its port.

    • Alternatively, you can use your hand to remove the DPI sensor cable by wiggling it out of the port.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Ryan Matesa

Membro da: 07/12/18

248 Reputazione

1 Guida realizzata

Team

UW Tacoma, Team S1-G3, Cardinal Summer 2018 Membro di UW Tacoma, Team S1-G3, Cardinal Summer 2018

UWT-CARDINAL-SU18S1G3

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 77

Tutti i Tempi: 3,008