Introduzione

If you need to disassemble your Corsair Katar mouse, this guide will demonstrate how to take it apart.

Parti

Nessuna parte richiesta.

  1. Unplug your mouse before starting.
    • Unplug your mouse before starting.

    • Flip the mouse over so the bottom is facing up.

    Aggiungi Commento

  2. Remove the three skates on the bottom of the mouse using the plastic opening tools.
    • Remove the three skates on the bottom of the mouse using the plastic opening tools.

    • Skates will be very sticky.

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Use the JIS 0 screwdriver to remove the four 5 mm screws on the bottom of the mouse.

    Aggiungi Commento

    • Detach the bottom of the mouse from the upper shell.

    • Remove the shell slowly so as not to damage the white DPI cable inside the mouse.

    • Use the plastic opening tool to detach the white DPI sensor cable from its port.

    • Alternatively, you can use your hand to remove the DPI sensor cable by wiggling it out of the port.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ryan Matesa

Membro da: 12/07/2018

189 Reputazione

1 Guida realizzata

Team

UW Tacoma, Team S1-G3, Cardinal Summer 2018 Membro di UW Tacoma, Team S1-G3, Cardinal Summer 2018

UWT-CARDINAL-SU18S1G3

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 16

Tutti i Tempi: 85