Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
If the DPI (dots per inch) sensor inside your Corsair Katar mouse is not operating correctly, this guide will show you how to replace it.
Cosa ti serve
-
-
-
Use the JIS 0 screwdriver to remove the two 5mm screws holding the DPI sensor.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.