Salta al contenuto principale

Core Assembly Removal

Cosa ti serve

  1. Core Assembly Removal, Opening Procedure: passo 1, immagine 1 di 1
    • Remove the four Tri-point #00 screws (4.2 mm length) on the backside of the watch.

  2. Core Assembly Removal: passo 2, immagine 1 di 2 Core Assembly Removal: passo 2, immagine 2 di 2
    • Use an opening tool to get between the back cover and the metal housing of the watch.

    • Carefully pry the plastic back cover open.

    • Don't remove the back cover yet. There is a flex cable running to the core assembly inside.

  3. Core Assembly Removal: passo 3, immagine 1 di 2 Core Assembly Removal: passo 3, immagine 2 di 2
    • Lay down the watch and lift the back cover to access the sensor connector on the motherboard.

  4. Core Assembly Removal: passo 4, immagine 1 di 2 Core Assembly Removal: passo 4, immagine 2 di 2
    • Use a spudger to disconnect the sensor flex cable from the motherboard.

  5. Core Assembly Removal: passo 5, immagine 1 di 3 Core Assembly Removal: passo 5, immagine 2 di 3 Core Assembly Removal: passo 5, immagine 3 di 3
    • Remove the back cover.

    • When closing the watch make sure the rubber gasket is undamaged or replace it with a new one.

  6. Core Assembly Removal, Core Assembly Removal: passo 6, immagine 1 di 2 Core Assembly Removal, Core Assembly Removal: passo 6, immagine 2 di 2
    • Use a spudger to disconnect the display flex cable from the motherboard.

  7. Core Assembly Removal: passo 7, immagine 1 di 2 Core Assembly Removal: passo 7, immagine 2 di 2
    • Lift the core unit out of the housing.

    • The core's plastic frame sits tight inside the housing.

    • Carefully thread the display flex cable through the gap of the core's plastic frame.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Tobias Isakeit

Membro da: 03/31/14

116.767 Reputazione

188 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

322 Membri

2.506 Guide realizzate

3 Commenti

thanks, loved seeing this watch from the inside!

Crystal Blu - Replica

Great, but now I need to know how to get to the glass to replace it.

selwood.maria - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 54

Tutti i Tempi: 2,871