Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Conair Cord-Keeper 169XR Fan Grill Replacement

Introduzione

If you have dropped your hair dryer, the front grill may be dented or loose.

Cosa ti serve

  1. Conair Cord-Keeper 169XR Fan Grill Replacement, Handle Cover: passo 1, immagine 1 di 2 Conair Cord-Keeper 169XR Fan Grill Replacement, Handle Cover: passo 1, immagine 2 di 2

    • Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.

    Traduci

  2. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 2, immagine 1 di 1

    • Be cautious of pieces that can possibly fall out when removing the face of the handle.

    • Once you have taken the screws out, take the top half of the handle off by lifting it off of the dryer.

    Traduci

  3. Conair Cord-Keeper 169XR Fan Grill Replacement, Dryer Head: passo 3, immagine 1 di 2 Conair Cord-Keeper 169XR Fan Grill Replacement, Dryer Head: passo 3, immagine 2 di 2

    • Remove the inner white disk piece by gently pulling it out with your finger nail.

    Traduci

  4. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 4, immagine 1 di 3 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 4, immagine 2 di 3 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 4, immagine 3 di 3

    • Gently remove the tan boxes (power supply) by wiggling them out of place and set them aside so you can take the back part of the handle off.

    Traduci

  5. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 5, immagine 1 di 2 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 5, immagine 2 di 2

    • Remove the inner white disk piece from the base of the dryer head by gently pulling it out with your finger nail.

    Traduci

  7. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 6, immagine 1 di 1

    • Unscrew the three 12 mm long Phillips #2 screws to remove the back of the hairdryer.

    Traduci

  8. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 7, immagine 1 di 1

    • Once the three screws are removed, pop the back of the dryer off by wiggling it until it comes loose. This shouldn't take too much effort.

    Traduci

  9. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 8, immagine 1 di 2 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 8, immagine 2 di 2

    • Unwind the cord and lay it to the side so you can get to the screw in the middle easier.

    • Remove the single 12 mm long Phillips #2 screw in the middle of the cord track.

    Traduci

  10. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 9, immagine 1 di 2 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 9, immagine 2 di 2

    • Take off the white cap that covers the heating coil. You will see a wound up piece of metal (cord retracting coil) underneath once the cap is removed.

    Traduci

  11. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 10, immagine 1 di 2 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 10, immagine 2 di 2

    • When removing the coil, make sure it stays wound up. It could very easily pop out, and you would have to wind it all the way back up and try to squeeze it back into the slot when you reassemble the dryer.

    • To remove the coil, use your screw driver to pop the coil out of the slot.

    • The second image is what the coil would look like if it came undone when you removed it.

    Traduci

  12. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 11, immagine 1 di 3 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 11, immagine 2 di 3 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 11, immagine 3 di 3

    • Once the coil is removed, unscrew the three 11 mm long Phillips #2 screws underneath to remove the retracting wheel.

    Traduci

  13. Conair Cord-Keeper 169XR Fan Grill Replacement, Fan Grill: passo 12, immagine 1 di 2 Conair Cord-Keeper 169XR Fan Grill Replacement, Fan Grill: passo 12, immagine 2 di 2

    • On the back of the dryer, remove this plastic piece so the wires don't get caught.

    Traduci

  14. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 13, immagine 1 di 1

    • Once the cords aren't blocked by that white piece anymore, you can just gently pop the outer shell of the dryer head off.

    Traduci

  15. Conair Cord-Keeper 169XR Fan Grill Replacement: passo 14, immagine 1 di 2 Conair Cord-Keeper 169XR Fan Grill Replacement: passo 14, immagine 2 di 2

    • Once you have removed the inner parts of the dryer head, you can just pull out the front grill piece and replace it with a new one.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Candace

Membro da: 01/23/14

992 Reputazione

7 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Cal Poly, Team 10-33, Maness Winter 2014 Membro di Cal Poly, Team 10-33, Maness Winter 2014

CPSU-MANESS-W14S10G33

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 1,372