Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
You are going to be starting from the handle and working your way to the head of the dryer in this disassembly.
Cosa ti serve
-
-
Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
-
-
-
Remove the inner white disk piece by gently pulling it out with your finger nail.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.