Aggiusta la tua roba Comunità Store

Compaq Presario CQ62-215dx Fan Replacement

Introduzione

Poor ventilation can cause heat to build up very quickly in your laptop. When the temperatures inside the case rise to excessive amounts due to a faulty fan, the risk of damaging important internal components increases and your laptop could shut down.

Cosa ti serve

  1. Compaq Presario CQ62-215dx Fan Replacement, Fan: passo 1, immagine 1 di 1

    • Turn the laptop upside down, and unscrew all the 3.0mm screws on the back cover with a Phillips screwdriver.

    Modifica

  2. Compaq Presario CQ62-215dx Fan Replacement: passo 2, immagine 1 di 1

    • Take out the Battery and the placeholder for the RAM and the Hard Drive

    Modifica

  3. Compaq Presario CQ62-215dx Fan Replacement: passo 3, immagine 1 di 1

    • There are four 1.2mm screws under the battery that are needed to be removed with a Phillips screwdriver.

    Modifica

  4. Compaq Presario CQ62-215dx Fan Replacement: passo 4, immagine 1 di 1

    • Turn the laptop back, and open the laptop cover. Use a spudger or your hand to carefully remove the keyboard.

    Modifica

  6. Compaq Presario CQ62-215dx Fan Replacement: passo 5, immagine 1 di 1

    • Once the keyboard is out, use the Metal Spudger or your hand in the corner of the laptop to lift the outside frame.

    Modifica

  7. Compaq Presario CQ62-215dx Fan Replacement: passo 6, immagine 1 di 1

    • You will have a bigger view of the entire motherboard and there should be screws that are still connected on it.

    • Unscrew all the 1.2mm screws on the motherboard and in the top corner that secures the fan with a Phillips screwdriver.

    Modifica

  8. Compaq Presario CQ62-215dx Fan Replacement: passo 7, immagine 1 di 1

    • Unplug the wires connected to the mother board with the Metal Spudger

    Modifica

  9. Compaq Presario CQ62-215dx Fan Replacement: passo 8, immagine 1 di 1

    • Unscrew the two 3mm screws beside the fan with a Phillips screwdriver.

    Modifica

  10. Compaq Presario CQ62-215dx Fan Replacement: passo 9, immagine 1 di 1

    • If all the screws have been removed, you should be able to lift the motherboard out carefully.

    Modifica

  11. Compaq Presario CQ62-215dx Fan Replacement: passo 10, immagine 1 di 1

    • When the motherboard is removed, flip it over, and you will have a view just like in the picture.

    Modifica

  12. Compaq Presario CQ62-215dx Fan Replacement: passo 11, immagine 1 di 1

    • Use the Phillips screwdriver to unscrew the three 2mm screws that connect the fan to the CPU.

    Modifica

  13. Compaq Presario CQ62-215dx Fan Replacement: passo 12, immagine 1 di 1

    • Remove the current fan from the motherboard and replace with new component.

    • When reassembling, you will need to reapply thermal paste on the CPU.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 550