Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Compaq Presario CQ62 Motherboard Replacement

Cosa ti serve

  1. Compaq Presario CQ62  Motherboard Replacement, Motherboard: passo 1, immagine 1 di 1
    • Remove the two M2.5x5 screws securing the cover of the hard drive.

  2. Compaq Presario CQ62  Motherboard Replacement: passo 2, immagine 1 di 2 Compaq Presario CQ62  Motherboard Replacement: passo 2, immagine 2 di 2
    • Remove harddrive by pushing upwards on metal supports.

    • When free, release harddrive connector.

  3. Compaq Presario CQ62  Motherboard Replacement: passo 3, immagine 1 di 3 Compaq Presario CQ62  Motherboard Replacement: passo 3, immagine 2 di 3 Compaq Presario CQ62  Motherboard Replacement: passo 3, immagine 3 di 3
    • unscrew two screws holding lid for WLAN & RAM

    • remove screw holding WLAN module in place

    • Release the two RF connectors on the WLAN module.

  4. Compaq Presario CQ62  Motherboard Replacement: passo 4, immagine 1 di 1
    • Lift up wlan module to 45 degrees, and pull it gently out.

  5. Compaq Presario CQ62  Motherboard Replacement: passo 5, immagine 1 di 1
    • Remove bottom screws.

    • The seven marked in red color is holding the keyboard.

  6. Compaq Presario CQ62  Motherboard Replacement: passo 6, immagine 1 di 2 Compaq Presario CQ62  Motherboard Replacement: passo 6, immagine 2 di 2
    • To remove keyboard, use spudger to release the snaps between casing and keyboard top. All the way around the product except LDC area.

    • with a spudger or small flat screw driver firmly press the keybord from F-keys row downwards toward space key.

  7. Compaq Presario CQ62  Motherboard Replacement: passo 7, immagine 1 di 3 Compaq Presario CQ62  Motherboard Replacement: passo 7, immagine 2 di 3 Compaq Presario CQ62  Motherboard Replacement: passo 7, immagine 3 di 3
    • When pressing down on the keyboard the force must overcome the adhesive.

    • When lifting out keyboard be mindfull on the keyboard flex, that need to be disconnected when keyboard is loose.

    • remove the flex'es by opening the connectors and remove them (5 in total).

    • Remove 3 screws (marked Red)

    • Finally the top cover can be removed with a spudger.

Conclusione

To reassemble your device, follow these instructions in reverse order. To dissasemble the logic board see the other ifixit guide for this laptop.

Altre 5 persone hanno completato questa guida.

Un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 13

Tutti i Tempi: 5,941