Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the laptop over with the rear panel facing forward.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a TR8 Torx screwdriver, remove the two T8 Torx screws that secure the LED cover to the base enclosure.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the laptop back over with the front facing forward. Open the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the F1 and F2 keys near the top left corner of the keyboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the Scroll and Pause keys near the top right corner of the keyboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While holding the Scroll and Pause keys, insert a spudger between the keys into the notch in the LED cover. Lift up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the back edge of the keyboard and pull towards the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the cable connecting the fan to the system board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the the heat sink up and out of the computer.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.