Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Comfort Zone CZ6C Fan Blades Replacement

Cosa ti serve

  1. Comfort Zone CZ6C Fan Blades Replacement, Fan Blades: passo 1, immagine 1 di 3 Comfort Zone CZ6C Fan Blades Replacement, Fan Blades: passo 1, immagine 2 di 3 Comfort Zone CZ6C Fan Blades Replacement, Fan Blades: passo 1, immagine 3 di 3
    • The metal cage is kept in place by three plastic tabs on the plastic body. Focus your pulling around these tabs to make the job easier.

    • In order to remove the metal cage, place one hand firmly on the back plastic body and your other hand on the metal cage.

    • Now work your way around the edge of the fan cage and pull it away from the plastic body.

  2. Comfort Zone CZ6C Fan Blades Replacement: passo 2, immagine 1 di 2 Comfort Zone CZ6C Fan Blades Replacement: passo 2, immagine 2 di 2
    • To remove the fan blade, reach behind it and slowly pull it towards you.

    • If the fan blade axle has any hair or dirt, then clean it with a cloth to avoid further fan blade blockage.

    • If you are having difficulty removing the fan blade, then generously apply WD-40 to the fan blade axle.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 17-5, Forte Spring 2015 Membro di Cal Poly, Team 17-5, Forte Spring 2015

CPSU-FORTE-S15S17G5

4 Membri

5 Guide realizzate

2 Commenti

Where does one buy the replacement blades?

Frank Gould - Replica

where does one buy the replacement blades??

Luis Marrero - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 19

Tutti i Tempi: 5,829