Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Clean the display case thoroughly with glass cleaner and a paper towel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently pry the glass away from the glue on the frame. Be careful not to shatter the glass.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Apply a thin, solid line of a strong adhesive, such as Gorilla Glue, to the entire inner border of the display case where the glass attaches.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently, but firmly, press the glass back into the felt lining. Run your finger with firm pressure along the entire lining of the glass two times.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Allow the glue to set for 2-4 hours for the strongest bond.
-
Keep the case in the upright position while the glue sets.
-
Do not close or shut the case during the drying/setting process.
-