Salta al contenuto principale

Introduzione

Be careful not to crack the faceplate or the screen of this tablet with the spudger. Take care not to break the motherboard when removing it from the plastic housing.

Ricambi

Nessuna parte specificata.

  1. Wedge the metal spudger in between the faceplate and the body of the tablet. Carefully pry the faceplate away from the body of the tablet. Carefully pry the faceplate away from the body of the tablet.
    • Wedge the metal spudger in between the faceplate and the body of the tablet.

    • Carefully pry the faceplate away from the body of the tablet.

  2. Carefully lift the screen and set it face down on a soft surface to not scratch it.
    • Carefully lift the screen and set it face down on a soft surface to not scratch it.

  3. Remove the 4 3.8mm phillips #000 screws holding on the motherboard using the PH000 phillips head. Remove the 4 3.8mm phillips #000 screws holding on the motherboard using the PH000 phillips head.
    • Remove the 4 3.8mm phillips #000 screws holding on the motherboard using the PH000 phillips head.

  4. Remove the 2 ribbons from the motherboard by pulling the black connections out of the white connections on the motherboard.
    • Remove the 2 ribbons from the motherboard by pulling the black connections out of the white connections on the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Daniel Ulrich

Membro da: 29/09/2016

494 Reputazione

3 Guide realizzate

Team

IUPUI, Team 3-4, Harley Fall 2016 Membro di IUPUI, Team 3-4, Harley Fall 2016

IUPUI-HARLEY-F16S3G4

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 8

Tutti i Tempi: 457