Aggiusta la tua roba Comunità Store

Coby DVD-R11000 3-Pin Power Cable Replacement

Cosa ti serve

  1. Coby DVD-R11000 3-Pin Power Cable Replacement, Outer Casing: passo 1, immagine 1 di 3 Coby DVD-R11000 3-Pin Power Cable Replacement, Outer Casing: passo 1, immagine 2 di 3 Coby DVD-R11000 3-Pin Power Cable Replacement, Outer Casing: passo 1, immagine 3 di 3

    • Remove the four 1cm screws, two on each side, of the DVD player with the Phillips #1 screwdriver.

    • Remove the five 1cm screws on the back of the DVD player with the Phillips #1 screwdriver.

    • It is not required to remove the other seven screws in the middle between the I/O ports.

    Traduci

  3. Coby DVD-R11000 3-Pin Power Cable Replacement: passo 2, immagine 1 di 3 Coby DVD-R11000 3-Pin Power Cable Replacement: passo 2, immagine 2 di 3 Coby DVD-R11000 3-Pin Power Cable Replacement: passo 2, immagine 3 di 3

    • Position the DVD player so that the back is facing you

    • Grab underneath the sides of the DVD player and lift the front of it upwards.

    • Carefully pull the top of the casing off

    Traduci

  4. Coby DVD-R11000 3-Pin Power Cable Replacement, 3-Pin Power Cable: passo 3, immagine 1 di 2 Coby DVD-R11000 3-Pin Power Cable Replacement, 3-Pin Power Cable: passo 3, immagine 2 di 2

    • Gently pinch the 3-pin white adapter of the wire connecting the power cord to the circuit board.

    • Remove the wire from the circuit board.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Andrew

Membro da: 10/22/14

501 Reputazione

5 Guide realizzate

Distintivi: 5

+2 altri distintivi

Team

UMass Dartmouth, Team 1-6, Shastany Fall 2014 Membro di UMass Dartmouth, Team 1-6, Shastany Fall 2014

UMASSD-SHASTANY-F14S1G6

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 434